OPTIMISE YOUR TRIM TOOL PERFORMANCE WITH PASLODE LUBRICATING GREASE
It is now possible to EXTEND YOUR FINISHING TOOL MAINTENANCE CYCLE TO A MASSIVE 40,000 SHOTS by using our NEW tool lubricating grease!
LESS TOOL DOWNTIME, IMPROVED PERFORMANCE,
MAXIMUM EFFICIENCy
This lubricating grease is your new go-to for reinvigorating your tool, enabling improved performance and
supercharging your on-site productivity.
This lubricating grease is your new go-to for reinvigorating your tool, enabling improved performance and supercharging
your on-site productivity.
Snip it.
Squeeze it.
Apply with eASE.
When using the new Paslode Tool Grease with your Paslode 2nd Fix tools (IM65, IM65A and IM50) you can add
weeks to your maintenance cycle. The new formula allows you to fire
OVER 20 BOXES OF BRADS before another application is required.
That’s a massive decrease in tool down time, allowing you to
keep working hassle free for longer.
Use the grease sachet as a replacement for your oil lubrication for maximum performance, alongside our Paslode cleaning spray (product code 115251).
Look after your tool and
your tool will look after You!
Available from...
FAQs
How much grease do I need to use per tool?
One sachet is the optimum amount to grease one tool.
Can I use the Paslode Tool grease with my old 18ga and 16ga trim tools?
Yes – the Paslode Tool grease can replace the old oil lubrication that’s been used in the past. The tools needs to be thoroughly cleaned out to ensure there is minimum amounts of oil left in the tools to avoid it binding with the grease.
When should I lubricate my 18ga and 16ga trim tools?
As a general rule of thumb we recommend every 40,000 shots or after around 20 boxes of brads.
Can I use the Paslode Tool grease with other Paslode tools besides the trim tools?
Yes – you can use the Paslode Tool grease in our Xi & Ci tools (360Xi, PPNXi, Combi Xi. IM360Ci and PPN35Ci) as a lubricant replacement for oil in the tools. The lubrication frequency is the same as with the oil that is used today.