The clear choice of nail for

roof battening

For Roofers looking for the ultimate peace of mind when choosing the right nails, Paslode have you covered with the only roof batten nail worth considering. And now it’s even easier to make the right choice from the very start with the introduction of the Paslode Roof Batten Nail box.

The clear choice of nail for roof battening

For Roofers looking for the ultimate peace of mind when choosing the right nails, Paslode have you covered with the only roof batten nail worth considering. And now it’s even easier to make the right choice from the very start with the introduction of the Paslode Roof Batten Nail box.

Driven by customer feedback, the new Roof Batten Nail box design is tailored specifically for roofers, providing a clear choice and removing the hassle out of the decision-making process. With Paslode, it’s never been easier to find exactly the right nail for the job in hand. By picking up a Paslode roofing box you can be assured that you conform to specifications, using the best quality nails.

For applications that

require a bit of clout,

why not choose the

Paslode IM45 CW system?

The IM45 CW is designed to fire clout nails into a wide range of substrate including flat roof membrane, Bitumen shingles and roofing felt, but can be used wherever there’s a need to fix standard clout nails, making the tool a great on-site all-rounder.

You can rely on the Paslode

Roof Batten nails to be:

Industry Approved: BS 5534

Eurocode 5. Service Class 2. CE marked. Made in Europe

Batten Manufacturer Approved

See NFRC Guidance Note (GN59)

Marked 'P' Head Nail: Easy to spot on-site for conformity and peace of mind

As stated in NFRC’s Guidance Note (GN59), the 63 x 3.1mm Galvanised Paslode Nail for both the 360Xi and IM350 tool systems are tested and proven to equal or better the performance requirement set out in BS 5534. For us, it’s not just about what’s on the outside, it’s what’s on the inside that counts! And you can trust the quality of the 63 x 3.1mm Paslode fixing to meet your roofing requirements.

Now with our Exclusive

Marked 'p' nail head!

In adding the easily identifiable ‘P’ Head to our nails, you now have an excellent visual aid to be able to spot an approved fixing, providing both installers and site inspectors with complete peace of mind. This new ‘P’ head is an excellent aid to encourage the user to install the roof batten nails at the correct depth finish (flush to the batten surface).

ROOFING MEMBRANE

ROOF SHINGLES

ROOFING FELT

ROOFING MEMBRANE

ROOF SHINGLES

ROOFING FELT

The IM45 CW tool itself benefits from all the quality

and reliability you’d associate with Paslode.

With an optimum 30 joules of fire power you can be sure of a clean, flush finish every time.

The tool has also been designed with useability in mind - with an engineered rubber nose piece

to prevent slipping and material damage and a handy depth of drive adjuster you can be sure of

the highest quality fixing every time.

You can rely on the

Paslode Roof Batten nails to be:

BS 5534 compliance

Eurocode 5. Service Class 2 + CE / UKCA marked

Made in Europe

Clear choice - New box design

See NFRC Guidance Note (GN59)

As stated in NFRC’s Guidance Note (GN59), the 63 x 3.1mm Galvanised Paslode Nail for both the 360Xi and IM350 tool systems are tested and proven to equal or better the performance requirement set out in BS 5534. For us, it’s not just about what’s on the outside, it’s what’s on the inside that counts! And you can trust the quality of the 63 x 3.1mm Paslode fixing to meet your roofing requirements.

Now with our Exclusive

Marked 'p' nail head!

In adding the easily identifiable ‘P’ Head to our nails, you now have an excellent visual aid to be able to spot an approved fixing, providing both installers and site inspectors with complete peace of mind. This new ‘P’ head is an excellent aid to encourage the user to install the roof batten nails at the correct depth finish (flush to the batten surface).